Insignia NS-27RTV manual 13

									NS-27RTV 27-inch Color TV
	7 Repeat steps 1 through 6 to lock other					5	Press	or	to highlight VIDEO LOCK and
		channels. When you have finished locking					press	or	to highlight OFF.
		channels, press EXIT to return to normal				6 Press EXIT to return to normal viewing.
		viewing.				Locking the front panel
		If you try to tune a locked channel, the
						You can lock the front panel buttons to prevent
		television does not display it, but displays the
		nearest unlocked channel.				your settings from being changed accidentally.
Unlocking channels						When the front panel lock is ON, all control
						buttons on the television front panel (except
	To unlock locked channels:					POWER) will not operate.
1		Press MENU, then press or to display				To lock the front panel:
		the LOCKS menu.				1 Press MENU. The menu screen appears.
2		Press		or	to display the password
						2	Press	or	to select the LOCKS menu.
		entering mode.
						3	Press	or	to display the password
	3 Use the number buttons (0-9) to enter your
							entering mode. Use the number buttons (0-9)
		password, then press ENTER. The LOCKS
							to enter your password, then press ENTER.
		menu appears.
4							The LOCKS menu appears.
		Press		or	to highlight CH LOCK and	4	Press	or	to select FRONT PANEL
		press		or	to display the CH LOCK menu.
							LOCK and press or to select ON. If a
5		Press		or	to highlight CLEAR and clear
							button on the front panel is pressed, the
		all channels from the list of locked channels.					message NOT AVAILABLE appears.
6		Press ENTER.				5 Press EXIT to return to normal viewing.
	7 Press EXIT to return to normal viewing.					Unlocking the front panel
Locking the video inputs						To unlock the front panel:
	With the VIDEO LOCK feature, you can lock out
						1	Press and hold VOLUME on the front
	the input sources (VIDEO1, VIDEO2,
							panel of the television for about ten seconds
	COMPONENT) and channels 3 and 4. You
							until the message FRONT PANEL
	cannot select the input sources with the TV/AV
							LOCK:OFF appears on the screen.
	button or channel buttons unless you clear the
	setting.						-OR-
							Press MENU. The menu screen appears.
	Note		After programming VIDEO LOCK, change
						2	Press	or	to select the LOCKS menu.
			the channel or press the TV/AV button			3	Press	or	to display the password
			before turning off the television. Failure to do
							entering mode. Use the number buttons (0-9)
			so cancels the programming for video inputs
			locked using this procedure.				to enter your password, then press ENTER.
							The LOCKS menu appears.

To lock video inputs:

1Press MENU. The menu screen appears.

2Press or to select the LOCKS menu.

3Press or to display the password entering mode. Use the number buttons (0-9) to enter your password, then press ENTER. The LOCKS menu appears.

4Press or to highlight VIDEO LOCK.

5Press or to select:

•OFF: Unlocks all video sources.

•VIDEO: Locks VIDEO1, VIDEO2, COMPONENT sources.

•VIDEO +: Locks VIDEO1, VIDEO2, COMPONENT, channel 3, and channel 4. Use this option if you use the antenna terminal to play a video tape.

6Press EXIT to return to normal viewing.

Unlocking the video inputs

To unlock locked video inputs:

1Use the number buttons (0-9) to display the television channel you wish to lock.

2Press MENU, then press or to display the LOCKS menu.

3Press or to display the password entering mode.

4Use the number buttons (0-9) to enter your password, then press ENTER. The LOCKS menu appears.

4Press or to select FRONT PANEL LOCK and press or to select OFF.

5Press EXIT to return to normal viewing.

Labeling channels

Channel labels appear over the channel number display each time you turn on the television, select a channel, or press -/DISPLAY. You can choose any four characters to identify a channel.

Note To return from CH LABEL menu to the OPTION menu, select OPTION MENU, then

press or .

To label channels:

1Select a channel you want to label.

2Press MENU, then press or to select the OPTION menu.

3Press or to select CH LABEL, then press or . The CH LABEL menu appears.

4Press or to select SET/CLEAR.

5Press or to select SET.

6Press ENTER to select LABEL, then press or to enter a character in the first space. Press the button repeatedly until the character you want appears on the screen.

12 www.insignia-products.com