Insignia
To connect the subwoofer: | FM Antenna connection |
1Using the subwoofer RCA cable, connect the AV
receiver's SUBWOOFER PRE OUT jack to the | FM 75 Ohm | |
input on your powered subwoofer, as shown. |
| |
Front right speaker | Front left speaker |
|
| Center speaker | Insert the plug |
| fully into the jack | |
|
|
Thumbtacks
Indoor FM antenna (supplied)
Powered subwoofer | Surround right speaker | Surround left speaker |
Connecting devices
Warning
Do not plug the AC cord into the AC outlet until all connections are completed.
Notes
•Be sure to observe the color coding when connecting audio and speaker cords.
•Make connections firmly and correctly. Failure to do this can cause loss of sound, add noise to the sound, or damage your receiver.
To connect the antennas:
1Connect the FM antenna to your receiver.
Note
If you are using an indoor FM antenna, change the position of the antenna until you get the best reception of your favorite FM stations.
To improve reception, use a 75 Ω outdoor antenna instead of an indoor antenna. Disconnect the indoor antenna before replacing it with an outdoor antenna.
Tip
Once your receiver is ready for use, you need to tune into a radio station and position the antenna to achieve the best possible reception.
If you cannot achieve good reception with the supplied indoor FM antenna, try a commercially available outdoor FM antenna instead.
2Connect the AM loop antenna to the receiver.
Notes
Connecting the antenna
This section explains how to connect the supplied indoor FM antenna and AM loop antenna.
The receiver won’t pick up any radio signals without any antenna connected, so you must connect the antenna to use the tuner.
AM Antenna connection
Push | Insert wire | Release |
Assembling the AM loop antenna
Place the AM loop antenna as far as possible from the receiver, television, speaker cords, and the AC cord. Change the position of the antenna until you get the best reception of your favorite AM stations.
To improve reception, use an outdoor AM antenna instead of a loop AM antenna. Disconnect the indoor antenna before replacing it with an outdoor antenna.
Connecting audio components
HDMI cable
Receiver
TV or projector | Game console |
| AM loop antenna (supplied) |
8 | www.insigniaproducts.com |