Insignia
Tip
You can also press the TUNE MODE and arrow buttons on the remote control.
- OR -
•To manually tune to a station:
•Press TUNING MODE until the AUTO indicator goes off.
•Press and hold TUNING 
or 
. The receiver tunes up or down the frequency band as long as you hold the button. Press the button repeatedly to tune up or down by steps.
Tip
•In Manual Tuning mode, FM stations are in mono.
•If the signal from a stereo FM station is weak, it may be impossible to get good reception. In this case, switch to Manual Tuning mode and listen to the station in mono.
•You can also press the TUN MODE and arrow buttons on the remote control.
Deleting preset stations
To delete a preset station:
1Select the preset you want to delete.
2Press TUNING MODE while pressing and holding MEMORY. The preset is deleted and its number disappears from the display.
Using the listening modes
Notes
•You can only select the Dolby Digital and DTS listening modes if your
•The listening mode you can select depends on the format of the input signal. To check the format, see “Displaying source information” on page 17.
•You can only select Mono, Direct, and Stereo listening modes with a pair of headphones is connected.
•Listening modes cannot be selected while a pair of headphones is connected.
- OR -
•To tune to a station by entering the frequency:
•Using the remote control, press TUNER repeatedly to select AM or FM, then press D.TUN.
•Within eight seconds, press the number buttons to enter the frequency of the radio station you want. For example, to tune to 87.50, press 8, 7, then 5.
Presetting FM or AM stations
You can store a combination of as many as 40 of your favorite AM or FM stations as presets.
To store a station as a preset:
1Tune to the FM or AM station that you want to store as a preset. See “Listening to the radio” on page 18 for information on tuning your receiver.
2Press MEMORY. The preset number flashes.
3While the preset number is flashing (about eight seconds), press PRESET 
or 
to select a preset number from one through 40.
4Press MEMORY again to store the station or channel. The station or channel is stored and the preset number stops flashing.
5Repeat steps 1 through 4 to preset your favorite radio stations.
Tuning to a preset station
To tune to a preset station:
•To select a preset, press PRESET 
or 
on the receiver, or press CH +/– on the remote control.
Tip
You can also press the number buttons on the remote control to select a preset station directly.
The receiver’s listening modes can transform your listening room into a movie theater or concert hall, with high fidelity and stunning surround sound.
The following audio formats are supported by the listening modes:
•
•
•
•
Selecting a listening mode
To select a listening mode:
•Press one of the following buttons. If you are using the remote control, press the RECEIVER button first. See “Listening modes” on page 20, and
•
•
•
•
www.insigniaproducts.com | 19 |