
Insignia
• When successfully joined, the power indicator | Rocketboost Network Capabilities | ||
LED on your other Rocketboost device will | The maximum number of Rocketboost devices in a | ||
stop blinking and stay on. | |||
Rocketboost Network is nine. If you already have | |||
• If joining fails after 30 seconds, the display on | |||
nine and attempt to join an additional device, | |||
your surround sound receiver shows | |||
joining will fail for the new device. | |||
“Timeout.” If this occurs, repeat the above | |||
|
| ||
steps. |
| Note | |
Listening to music from other Rocketboost™ products |
| If you want to remove a device from your | |
|
| Rocketboost network you need to rejoin it to a | |
To listen to music: |
| different hub device (this basically creates a 2nd | |
| Rocketboost network). |
1Press the Power button on your surround sound
receiver to turn it on. | The maximum number of audio streams that can be |
2 Press SETUP. The Setup Menu opens. | sent simultaneously on the Rocketboost network is |
| five (stereo CD quality). |
| Setup Menu | Installing batteries in the remote control | |
1. | HDMI Input | Cautions | |
2. | Component | • If the remote control doesn’t work reliably, try | |
3. | Digital Audio | replacing the batteries. | |
4. | Sp Config | • Don’t mix new and old batteries or different | |
5. | Sp Distance | types of batteries. | |
6. | Level Cal | • If you intend not to use the remote control for a | |
7. | Audio Adjust | long time, remove the batteries to prevent | |
damage from leakage or corrosion. | |||
8. | Source Setup | ||
• Remove expired batteries as soon as possible to | |||
9. | Hardware | ||
prevent damage from leakage or corrosion. | |||
10. | HDMI Setup | ||
| |||
11. | Rocketboost | To install the batteries: | |
3 Press | or to select 11. Rocketboost, then | 1 Remove the cover. | |
| |||
press ENTER. The Rocketboost menu opens. |
| ||
| Rocketboost |
| |
| Send Wireless Audio |
| |
| Listen to Wireless Audio |
| |
| Connect to Wireless Network |
| |
| Hub (Manager) Enable |
| |
|
| Batteries (AA/R6) |
4Press or
to select Listen to Wireless Audio, then press ENTER. The Listen to Audio menu opens.
Listen to Audio
[ENTER] to Select
5Press or
to highlight the Rocketboost device you want to listen to, then press ENTER to select it.
2Insert two AA batteries into the compartment matching the polarity indicated.
3Replace the cover.
Using the remote control
Use the remote control by pointing it towards the receiver’s remote sensor window. Objects between the remote control and sensor window may prevent proper operation.
Remote control sensor
Receiver
Approx. 16 ft. (5 m)
www.insigniaproducts.com | 15 |