Insignia
Display
#Indicator
1Audio input indicator
2Listening mode indicator
3 Tuning indicators
4 SLEEP indicator
5 MUTING indicator
6 DIGITAL display
Back
# | Description | Function |
1 | DIGITAL IN jacks | Plug the optical digital cable from a game (1) or |
|
| TV/CD (2) into the upper jacks, or the coaxial |
|
| digital cable from a BD/DVD into the lower jack. |
2 | HDMI jacks | Plug the HDMI signal input cable from a GAME |
|
| (IN4), CBL/SAT (IN3), VCR/DVR (IN2), BD/DVD |
|
| (IN1). |
|
| Plug the HDMI output signal cable to a TV or |
|
| monitor into the OUT jack. |
3 | ANTENNA connectors | Connect a 75 ohm FM antenna to the coaxial |
|
| connector or an AM loop antenna to the wire |
|
| connectors. |
4 | FRONT SPEAKERS | Connect the front speakers to these jacks. |
| SURROUND SPEAKERS | Connect the left and right surround speakers and |
| CENTER SPEAKER | the center speaker to these connectors. If you use |
|
| the |
|
| do not connect them here. |
5 | AC power cord | Plug this cord into an AC power outlet. |
|
|
|
6 | COMPONENT video jacks | Plug the cables from a component video source |
|
| into the #1 (BD/DVD) or #2 (CBL/SAT) jacks. |
|
| Plug the cables to a component video monitor into |
|
| the OUT jacks. |
|
| The jacks are color coded (red, green, and blue) to |
|
| correspond to the cable connectors. |
7 | Composite Video and | Plug the composite video and audio L/R output |
| Audio L/R jacks | cables from the indicated devices into these jacks. |
|
| For video recording, plug the composite video and |
|
| audio L/R input cables to a VCR or DVR into the |
|
| OUT jacks |
|
|
|
8 | MONITOR OUT V (Video) | Connect this jack to a TV monitor. |
9 | SUBWOOFER | Connect the subwoofer to this jack. |
|
|
|
Subwoofer
Front
Back
# | Description | Function |
1 | Standby/On indicator | Red: Subwoofer in standby mode |
|
| Blue: Subwoofer on |
|
| With the auto standby function, the subwoofer |
|
| automatically turns on when an input signal is |
|
| detected in standby mode. When there is no |
|
| input signal, the subwoofer automatically |
|
| enters standby mode. |
|
| Note: The auto standby function turns the subwoofer |
|
| on when the input signal exceeds a certain level. If the |
|
| auto standby function does not work reliably, try |
|
| slightly increasing or decreasing the subwoofer output |
|
| level on the receiver |
2 | OUTPUT LEVEL control | This control is used to adjust the volume of the |
|
| subwoofer. |
3 | LINE INPUT jack | This jack should be connected to the subwoofer |
|
| |
|
| RCA cable. |
4 | www.insigniaproducts.com |