Insignia NS-HT511 Power, SETUP, ENTER, Power, ENTER, Sender, Enable, RETURN, Disable, Disable, Signal Status, Hub (Manager), Hub (Manager), Connect to Wireless Network

Insignia NS-HT511 Home Theater System

3Press or to select Send Wireless Audio, then press ENTER. The Send Audio menu opens.

3Press or to select 11. Rocketboost, then press ENTER. The Rocketboost menu opens.

Send Audio

Front	< Enabled >
Surround	Enabled
Subwoofer	Enabled

Rocketboost

Send Wireless Audio Listen to Wireless Audio Connect to Wireless Network Hub (Manager) Enable

[< >] to Enable/Disable

4Press or to select the Sender you want

(Front, Surround, or Subwoofer), then press or to Enable or Disable the selected sender.

Sender	Signal Status
Front Enabled	Front is ON
Front Disabled	Front is OFF
Surround Enabled	Surround signal is ON
Surround Disabled	Surround signal is OFF
Subwoofer Enabled	Subwoofer signal is ON
Subwoofer Disabled	Subwoofer signal is OFF

Note

•The Front sender should be enabled if you want to send the front left/right audio signals to other Rocketboost receivers (for example Rocketboost headphones or Rocketboost receiver products in other rooms of your house).

•We recommend that you do not enable channels that you will not be using.

Establishing communications with other Rocketboost devices

Note

Every Rocketboost™ network must contain a device called a Hub, which directs network data traffic and helps devices join the network. The network can have only one hub. If you are setting up your network for the first time, choose one of your Rocketboost™ senders to be your hub. If you already have a Rocketboost™ network, then set the Hub (Manager) setting to Disable.

To connect to a Rocketboost wireless network:

1Press the Power button on your surround sound receiver to turn it on.

2Press SETUP. The Setup Menu opens.

Setup Menu

1.HDMI Input

2.Component

3.Digital Audio

4.Sp Config

5.Sp Distance

6.Level Cal

7.Audio Adjust

8.Source Setup

9.Hardware

10.HDMI Setup

11.Rocketboost

4Press or to select Hub (Manager), then

press ENTER, then press or to select Enable or Disable.

If you are setting up your network for the first time, choose one of your Rocketboost senders to be your hub. If you want the surround sound receiver to be the hub then set the Hub (Manager) setting in this menu to Enable.

Hub Enable

Hub Status < Enabled >

[< >] to Enable/Disable

If you already have a Rocketboost network established, set the Hub (Manager) setting in this menu to Disable.

5Press RETURN to go to the previous menu.

Note

Every new Rocketboost device you add to your Rocketboost network must be “joined” to your Rocketboost hub device. If the surround sound receiver is the Hub of your network then repeat the following steps for each of your Rocketboost devices on your network.

6If possible, bring your existing Rocketboost Hub device, or the new Rocketboost device to which you’d like to join, into the same room as the soundbar.

7Press the Power button on your other Rocketboost device to turn it on.

8Press and hold the Power button on your other Rocketboost device for more than three seconds to put it into joining mode. The power indicator starts blinking rapidly and the unit will stay in joining mode for 30 seconds.

9Press or to select Connect to Wireless Network, then press ENTER.

10The display on your surround sound receiver shows “Connecting.” When connected to your other Rocketboost device, the display shows “Connected.”

14 www.insigniaproducts.com