Insignia NS-HT511 Configuring speakers (Sp Config menu), Off, Small, Front, Small, Option, Subwoofer, Sp Config, Speaker(s), Recommended, Sp Distance, Configuration

Insignia NS-HT511 Home Theater System

Use the remote control within about 16 feet		See “Using on-screen setup menus” on page 22 for
(5 meters) of the receiver and within 30 degrees of		information on accessing and using the menus.
perpendicular to the front of the receiver.
			Speaker cone diameter	Recommended
	Cautions
				Crossover Frequency
	• Do not expose the remote control to shock. In
			Over 8 in. (20 cm)	40/50/60 Hz
	addition, do not expose the remote control to
	liquids, and do not place in an area with high		6-1/2 to 8 in. (16 to 20 cm)	70 Hz, 80 Hz, 90 Hz
	humidity.		5-1/4 to 6-1/2 in. (13 to 16 cm)	100 Hz
	• Do not place the remote control under direct
			3-1/2 to 5-1/4 in. (9 to 13 cm)	120 Hz
	sunlight. The heat may cause deformation of
	the remote control.		Under 3-1/2 in. (9 cm)	150/200 Hz

•The remote control may not work properly if the remote sensor window of the receiver is under

			direct sunlight or strong lighting. In such a case,
			change the angle of the lighting or receiver, or			Notes
			operate the remote control closer to the remote				• For a more accurate setting, look up your
			sensor window.				speaker’s specifications.
							• Choose a higher crossover frequency if you
Configuring speakers (Sp Config menu)
							want more sound from your subwoofer.
This section explains how to specify which speakers				Using the Double Bass setting (Double Bass submenu of
are connected and defines their sizes.				Sp Config menu)
For speakers with a cone diameter larger than 6.5					Lets you boost bass output by feeding bass sounds
inches (16 cm), specify Large (full band). For those
					from the front left, right, and center channels to the
with a smaller diameter, specify Small (default
					subwoofer. Optional settings are On and Off.
crossover 120 Hz).
The crossover frequency can be changed in the						Note
Crossover submenu.							This function can only be set if the Subwoofer
See “Using on-screen setup menus” on page 22 for							setting is Yes, and the Front setting is Large.
information on accessing and using the menus.				Setting wireless (This setting appears only when
	Note			RF-RBCARD is inserted)
		Speaker Configuration, Crossover Frequency, and			This menu is used if you are connecting your home
		Double Bass settings are disabled while headphones
		are connected, or when Audio TV OUT is set to On.			theater front left/right, surround, or subwoofer
					channels using Rocketboost wireless (see
					“Rocketboost Setup” on page 12 for more details
Speaker(s)			Configuration
					about Rocketboost).
Subwoofer			Yes–if a subwoofer is connected.		The On menu option results in the wired and
			No–If no subwoofer is connected.		wireless channels in your home theater to be
			Small–If speaker cone is 6.5 inches (16 cm) or less in		synchronized in time.
			diameter.		If any of these channels in your home theater are
Front			Large–If speaker cone is larger than 6.5 inches (16 cm)		connected with Rocketboost wireless, then set
			in diameter.		those channels to On. For example, if you are using
			Note: If the Subwoofer setting is No, the default setting		Rocketboost for wireless surround sound and
			for this is Large and cannot be changed.		wireless subwoofer in your home theater, then set
			Small–If speaker cone is 6.5 inches (16 cm) or less in		Wireless Sur and Wireless SW to On.
			diameter.		If you are using Rocketboost Wireless to send the
			Large–If speaker cone is larger than 6.5 inches (16 cm)		front left/right speaker audio signals to
Center and Surround			in diameter.		Rocketboost receivers in other rooms of your
			None–If no center speaker is connected.		house, and not for your left/right home theater
			Note: If the Front setting is Small, the Large option		speakers, then set Wireless Front to Off.
			cannot be selected.
					Option		Configuration
Setting the crossover frequency (Crossover Frequency					Wireless Front		On or Off
submenu of Sp Config menu)					Wireless Sur		On or Off
This setting is recommended for the speakers that
					Wireless SW		On or Off
you specify as Small. To get the best bass
performance from your speaker system, you need
to set the crossover frequency according to the size				Setting speaker distance (Sp Distance menu)
and frequency response of your speakers. Options
include 40Hz, 50Hz, 60Hz, 70Hz, 80Hz, 90Hz,					Lets you specify the distance from each speaker to
100Hz, 120Hz, 150Hz, and 200Hz.
					the listening position so that the sound from each
Use the diameter of the smallest speaker in your					speaker arrives at the listener’s ears as the sound
system when choosing the crossover frequency.					designer intended.

16 www.insigniaproducts.com