Insignia
Listening to FM stereo broadcasts | Recording on AUX |
To listen to FM stereo broadcasts:
•While listening to an FM broadcast, press the FM MODE button.
To record on the auxiliary device:
1Select the recording input source (this cannot be AUX).
OR
Note
Each time this button is pressed, the FM mode changes as follows:
•Stereo
•Mono
Note
If an FM stereo broadcast is poor due to a weak broadcast signal, select the FM mono mode to reduce the noise. The FM broadcasts are reproduced in monaural sound.
Recording
Notes
•The volume, tone (bass and treble), and balance settings have no effect on the recording signals.
•When you select tuner, CD, or PHONO as a recording source, recording may be made on TAPE or AUX, or both simultaneously.
Recording on tape
To record on tape:
1Select the recording input source (this cannot be TAPE).
OR
OR
2Start recording on the auxiliary device.
3Start play on your input device.
Using the sleep timer
The sleep timer automatically turns the receiver off after a specified period of time.
To use the sleep timer:
•Press the SLEEP button to specify the amount of time you want the receiver to play.
OR
Each time this button is pressed, the time changes as follows:
•10 minutes
•20 minutes
•30 minutes
•60 minutes
•90 minutes
•OFF
Note
While operating the sleep timer, the 
lights up.
2Start recording on the tape recorder.
3Start play on your input device.
12 |