Insignia
Remote control
1 | 11 |
2 |
|
3 | 12 |
4 | 13 |
5 | 14 |
6 | 15 |
7 | 16 |
|
8 |
| |
9 | 17 | |
10 | ||
|
Item Description
1POWER ON button
2Numeric keypad
3PRESETS button
4TUNING/PRESET 
button
5FM MODE button
6 | VOLUME / buttons |
|
7SPEAKER A button
8Input selector buttons
9DIMMER button
10SLEEP button
11STANDBY button
12MEMORY button
13TUNING/PRESET
button
14TUNING/PRESET MODE button
15MUTE button
16SPEAKER B button
17 | TREBLE/BASE / buttons |
|
Setting up your receiver
Unpacking your receiver
Your box includes the following:
•One receiver
•One remote control with two batteries
•This User Guide
•AM and FM antennas
Warning
Do not plug the AC cord into the AC outlet until all connections are completed.
Note
Be sure to observe the color coding when connecting audio and speaker cords.
Note
Make connections firmly and correctly. Failure to do this can cause loss of sound, add noise to the sound, or damage your receiver.
Locating your receiver
•Install your receiver on a stable flat surface. Position your receiver so that it can have a direct line of sight to the remote control.
•Do not expose your receiver to extremes of temperature or humidity.
•Avoid placing your receiver on a hot surface such as on top of other hot running equipment. Make sure that there is adequate ventilation to your receiver.
Caution
Do not install this receiver in a confined space such as a bookcase.
Note
Connect the AC cord only after the speakers, antenna, and all optional equipment have been connected. Never make or change any connections with the power turned on.
Connecting the antennas
23
1
4
Item Description
1FM (indoor) antenna
2FM (outdoor) antenna
3AM loop antenna
4 |