Item Description

3

MD recorder or other device.

Connecting a turntable

Insignia NS-R2000 Stereo Receiver

To connect your speakers:

•Connect your speaker cables to the receiver.

Notes

•If you have only one pair of speakers, connect them to the SPEAKER A terminals.

•Connect a second pair of speakers to the SPEAKER B terminals.

Note

To connect a turntable with an MC type cartridge, use a separate head amplifier or step-up transformer.

Connecting speakers

1

2

3

Item Description

1Speaker A.

2Speaker jacks.

3Speaker B.

Caution

Use speakers with an impedance of 8 Ω or more if using only the SPEAKER A or SPEAKER B terminals. Use speakers with an impedance of 16 Ω or more if using both the SPEAKER A or SPEAKER B terminals.

Caution

Do not let the bare speaker wires touch each other or any metal part of this receiver. Doing so may damage the receiver or speaker.

Be sure to connect the speakers firmly and correctly according to the channel (left and right) and the polarity (+ and -). If you do not make the connections correctly, you will not hear any sounds from the speakers.

If the sound is unnatural and lacks bass, the speaker polarity is incorrect.

Connecting headphones

To connect your headphones:

•Insert the headphone plug into the headphone jack on the receiver.

Notes

To hear sound from the headphones, make sure the SPEAKER A and SPEAKER B buttons are set to off.

Connecting the power

To connect your receiver to power:

•Plug the power cord into an AC outlet.

Installing batteries

Caution

Do not use Ni-Cd rechargeable batteries in this remote control.

To install the batteries:

1Remove the cover.

6

www.insignia-products.com