
Insignia
Connecting a tape player or
To connect a tape player or
•Connect the audio cable(s).
•Connect one end of the audio cables to the receiver.
•Connect the other end of the cables to the tape player or
Connecting six channel components
To connect your six channel components:
•Connect the audio cable(s).
•Connect one end of the audio cables to the receiver.
•Connect the other ends of the cables to the corresponding analog outputs of a six channel decoder or DVD player with six channel Dolby Digital (DTS) output.
Connecting a video game console or camcorder
To connect a video game console or camcorder:
1Connect your audio and video cables to the receiver.
2Connect the other ends of the cables to the video game console or camcorder.
Connecting the setup microphone
To connect the setup microphone:
•Connect the microphone to the SETUP MIC jack when performing auto speaker setup. For more information, see “Using Auto Setup” on page 19.
Notes
•Because the microphone for Auto Setup is designed for use with this receiver, do not use a microphone other than the one supplied with this receiver.
•After you have completed the auto setup procedure, disconnect the microphone.
16 |