Insignia
Item | Description | For more information, see... | |
|
|
|
|
11 | SELECT | button | |
| |||
|
|
| |
|
|
| |
12 | Input selector buttons | ||
|
|
| |
13 | TONE MODE button | ||
|
|
| |
14 | SOUND PARAMETER | ||
| button |
| on page 21. |
|
|
| |
15 | STEREO button | ||
|
|
| |
|
|
| |
16 | TEST tone button | ||
|
|
| |
|
|
|
|
17 | SELECT | button | |
| |||
|
|
| |
|
|
|
|
18 | SELECT | button | |
| |||
|
|
| |
|
|
| |
19 | DISPLAY button | ||
|
|
|
20DIGITAL INPUTS “Using your receiver” on page 24. button
21 | PRESET SCAN button | |
|
| |
|
|
|
22 | Numeric keypad |
|
|
|
|
23 | POWER ON button |
Installing batteries
Caution
Do not use
To install the batteries:
1Remove the cover.
Using the remote control
Use the remote control by pointing it towards the receiver’s remote sensor window. Objects between the remote control and sensor window may prevent proper operation.
23’ (7m)
Use the remote control within about 23 feet
(7 meters) of the receiver and within 30 degrees of perpendicular to the front of the receiver.
Caution
•Do not expose the remote control to shock. In addition, do not expose the remote control to liquids, and do not place in an area with high humidity.
•Do not place the remote control under direct sunlight. The heat may cause deformation of the remote control.
•The remote control may not work properly if the remote sensor window of the receiver is under direct sunlight or strong lighting. In such a case, change the angle of the lighting or receiver, or operate the remote control closer to the remote sensor window.
2Load two type AAA batteries into the compartment matching the polarity indicated.
3Replace the cover.
Note
Remove the batteries if they are not to be used for a long period of time.
23 |