
Insignia
Press the AUTO/MANUAL button | 2 | To cancel either the stereo mode or the 2CH | |
to select the surround mode as |
| downmix mode, select the surround mode | |
follows: |
| using the surround mode </> buttons. | |
• Auto Surround | 2CH downmix mode | ||
optimum surround mode is | |||
• | This mode allows the | ||
automatically selected | |||
depending on the signal format |
| encoded in DTS or Dolby Digital format to be | |
being input. The Auto indicator lights up. |
| mixed down into two front channels and to be | |
• Manual Surround |
| reproduced through only two front speakers | |
| or through headphones. | ||
different surround mode for the signal being |
| ||
• | When the SPEAKER button is set to OFF to | ||
input using the surround mode </> buttons. | |||
The Auto indicator turns off. |
| listen with headphones while playing the | |
When the SPEAKER button is set to off, the |
| ||
| Dolby Digital sources, it will enter the 2CH | ||
auto surround mode is invalid. |
| ||
| downmix mode automatically. | ||
When the auto surround mode is selected and |
| ||
|
| ||
the PCM (2 channel) digital signal or the analog | Listening to radio broadcasts | ||
stereo signal is being input, only the stereo | Auto tuning | ||
mode will be selected. | |||
When the auto surround mode is selected, the | To auto tune a radio station: | ||
surround modes other than the optimum | |||
1 | Press FM/AM to select the band. | ||
surround mode cannot be selected. | |||
|
|
Each time the surround mode </> buttons are pressed, the surround mode changes depending on the input signal format as follows:
Signal format | Selectable surround mode | |
being input | ||
| ||
|
| |
Dolby Digital EX | DOLBY DIGITAL | |
6.1 channel |
| |
sources. Dolby |
| |
Digital 5.1 |
| |
channel sources |
| |
|
| |
Dolby Digital 2 | DOLBY PLII MOVIE, DOLBY PLII | |
channel sources | MUSIC, DOLBY PRO LOGIC | |
|
| |
DTS sources, | DTS or DTS 96/24 | |
DTS 96/24 |
| |
sources |
| |
|
| |
96 kHz PCM (2 | DOLBY PLII MOVIE, DOLBY PLII | |
channel) sources | MUSIC, DOLBY PRO LOGIC | |
|
| |
PCM (2channel) | DOLBY PLII MOVIE, DOLBY PLII | |
sources, Analog | MUSIC, DOLBY PRO LOGIC, MATRIX, | |
stereo sources | CHURCH, THEATER, HALL, STADIUM |
OR
To cancel the surround mode for stereo operation:
1Press the STEREO button. Depending on the signal format being input, either the stereo mode or the 2CH downmix mode is selected.
OR
OR
Each time this button is pressed, the band changes as follows:
•FM ST
•FM MONO
•AM
When FM stereo broadcasts are poor because of weak broadcast signals, select the FM mono mode to reduce the noise. FM broadcasts are then reproduced in monaural sound.
2Press and hold the TUNING /
buttons for more than 0.5 seconds.
The tuner searches until a station of sufficient strength has been found. The display shows the tuned frequency and TUNED.
If the station found is not the station you want to listen to, repeat this procedure.
Weak stations are skipped during auto tuning.
Manual tuning
Manual tuning is useful when you already know the frequency of the station you want to listen to.
To manually tune a radio station:
1Press FM/AM to select the band.
Each time this button is pressed, the band changes as follows:
•FM ST
•FM MONO
•AM
When FM stereo broadcasts are poor because of weak broadcast signals, select the FM mono mode to reduce the noise. FM broadcasts are then reproduced in monaural sound.
27 |