Insignia NS-R5101 Using the remote control

Insignia NS-R5101 5.1 Surround Sound A/V Receiver

To adjust the sound parameters:	Using the remote control
1 Press the SOUND PARAMETER button.
	Using the buttons

2 Press the selectorbuttons to select the parameter.

3 Press the select orbuttons to adjust the parameter.

4 Repeat the above procedure to adjust the other parameters.

Adjusting each channel level with test tone

The volume level of each channel can be adjusted easily with the test tone function.

Note

When the SPEAKER button is set to off, the test tone function does not work.

To adjust each channel level:

1Press the TEST button.

The test tone mode is displayed and is heard from each channel’s speaker for two seconds as follows:

•FL—Front Left

•C—Center

•FR—Front Right

•SR—Surround Right

•SL—Surround Left

•SW—Subwoofer

Note

When the speaker setting is “N (NONE)”, the test tone of the corresponding channel is not available.

2At each channel, press the select or buttons to adjust the level as desired until the sound level of each speaker sounds equally loud.

3Press TEST to cancel the test tone function.

Item	Description		For more information, see...
1	STANDBY button		“Using your receiver” on page 24.
2	SLEEP button		“Using the sleep timer” on
			page 29.
3	DIMMER button		“Adjusting the display brightness”
			on page 29.
4	VOLUME	/	“Using your receiver” on page 24.
	buttons
5	MUTE button		“Using your receiver” on page 24.
6	CHANNEL LEVEL		“Adjusting the current channel
	button		level” on page 20.
7	SETUP button		“Navigating through the setup
			menu” on page 17.
8	MEMORY/ENTER		“Memorizing the adjusted channel
	button		levels” on page 21.
9	SELECT	button	“Navigating through the setup
			menu” on page 17.
10	Surround mode </>		“Enjoying surround sound” on
	buttons		page 26.

22 www.insignia-products.com