Insignia NS-R5101 5.1 Surround Sound A/V Receiver

5 If you selected CD, VIDEO1, or VIDEO2 as

Adjusting the treble and bass

the input source, you can press the DIGITAL

To adjust the treble and bass:

INPUTS button to select the digital or analog

audio input.

1 Press the TONE MODE button to enter the

 

tone mode. The tone mode is displayed for

 

several seconds.

OR

Note

Each time the DIGITAL INPUTS button is pressed, the audio input source changes as follows:

•Optical (O)

•Coaxial1 (C1)

•Coaxial2 (C2)

•Analog (A)

Notes

•When TUNER, AUX, TAPE, EXTERNAL IN, or VIDEO3 is selected as an input source, the analog input is selected automatically.

•If the selected digital input is not connected, the DIGITAL indicator flickers and the analog input is automatically selected.

•The selected digital or analog input is automatically assigned to the corresponding input source on the INPUT setup menu. For more information, see “Modifying the input settings” on page 18. If you do not hear the sound you expect, press DIGITAL INPUTS until you hear the sound you want.

•The sound from the component connected to the selected digital input can be heard regardless of the selected input source.

6Turn the MASTER VOLUME dial or press the VOLUME / buttons to adjust the sound level.

Note

When EXTERNAL IN is selected as an input source, you can not select the tone mode or adjust the tone.

2Press orto select the tone mode.

OR

Note

Each time you press these buttons, the tone mode changes as follows:

•OFF: To listen to a program source without the tone effect. DIRECT appears on the display.

•ON: To adjust the tone to your taste. DIRECT disappears from the display.

3With the Tone mode set to ON, press the or .

OR

-OR-

Press the MUTE button to turn the sound off. MUTE flickers on the display. Press the MUTE button again to turn the sound back on.

OR

Note

Each time you press these buttons, the tone mode changes as follows:

•TRBL

•BASS

•TONE ON

www.insignia-products.com

25