InSinkErator 14481 manual Cleaning Instructions, Personal Injury

Cleaning Instructions

PERSONAL INJURY

Wait until auger paddles stop before cleaning Waste Xpress.

1.Press stop button on control center to stop system (disposer & Waste Xpress).

2.Holding both handles remove discharge chute by . tilting it upward (see Figure 25).

3.Remove auger-bearing bracket by sliding the two captive fasteners inward and then pull bracket . upward (see Figure 26 and 27).

4.Lift auger and screen up and then out . (see Figure 26).

5.Remove auger from screen by lifting it up and out (see Figure 28).

6.Rinse auger, screen, auger compartment and . discharge chute. Auger, screen and discharge . chute are dishwasher safe and should be washed daily. Flush inlet and outlet with a fresh water . supply to keep the drain lines clean.

7.Install auger into screen then place screen .

over drive.

8.Ensure that the auger drops into position.

9.Secure bearing bracket with captive fasteners.

10.Install discharge chute by placing bottom, front . portion in first and then tilting back and downward.

Discharge

Chute

Figure 25.

Captive

Fasteners

Auger Screen

Figure 26.

Figure 27. Bearing Bracket

Figure 28.

17