Installing Disposer
PERSONAL INJURY
•For safe operation, The minimum required distance from the table top or trough to the mounting flange is 6 inches for standard body disposers .
(as specified by UL). See Figure 5.
•Moving shredder parts may cause serious injury if. a hopper or cone is not properly installed.
PROPERTY DAMAGE To avoid excess vibration, InSinkErator. recommends a minimum countertop thickness . of 16 gage stainless steel.
DISPOSER MOUNTING
The disposer can be mounted to the sink or trough using a standard InSinkErator mount or an . InSinkErator mounting adaptor.
NOTE: The InSinkErator #5 Sink Flange can not be used with the Waste Xpress system.
NOTE: InSinkErator must approve attachment to a non-InSinkErator sink.
CLEAN THE DRAIN LINE
With a drain line auger, clear away all hardened waste material in the horizontal drainpipe running from the drain trap to the main waste line.
6" min. 
(152.4 mm min.)
Figure 5.
7
