InSinkErator HC3/GN3, H770 INSTALLING THE FAUCET - H990, An assistant may be needed to hold

2

INSTALLING THE FAUCET - H990

A H990

■ Unpack dispenser components.

■ On a firm, flat surface, carefully straighten the copper tubing using hands only.

Property Damage: Do not pinch or break copper tubing. Do not distort the last 1 inch of tubing.

B

Make sure to use rubber gasket

to ensure proper seal.

H990

■Ensure that the black rubber gasket is properly seated into the base of the dispenser head and will surround the sink mount.

■Feed tubes down the hole in the sink or countertop until the base is at rest on the sink or countertop surface.

C

An assistant may be needed to hold

the dispenser head in place while securing the dispenser.

H990

■From under the sink, place the semi-circular mounting plate onto the threaded stud.

■Place wing nut onto the threaded stud. Make sure faucet head is at the desired angle. Tighten the wing nut until snug, while ensuring the semi- circular mounting plate extends beyond the sink hole.

8