InSinkErator INSTALLING THE FAUCET - H770, Make sure to use fiber gasket to ensure proper seal

2

INSTALLING THE FAUCET - H770

A H770

■ Unpack dispenser components.

■ On a firm, flat surface, carefully straighten the copper tubing using hands only.

Property Damage: Do not pinch or break copper tubing. Do not distort the last 1 inch of tubing.

B

Fiber

Gasket

Make sure to use fiber gasket

to ensure proper seal.

H770

■Ensure that the fiber gasket is properly seated against the base of the dispenser head.

DO NOT remove mounting screw or fiber gasket from base of dispenser.

C

An assistant may be needed to hold

the dispenser head in place while securing the dispenser.

H770

■Feed tubes down the hole in the sink or countertop until the base is at rest on the sink or countertop surface.

■Position faucet head at the desired angle.

D

Half moon shaped metal mounting plate

should cradle all descending tubes.

H770

■From below the sink, place semi- circular metal mounting plate over the mounting screw, ensuring the mounting plate covers the sink hole.

■Slide washer over so that the screw is now inside the smaller hole. Tighten the screw until snug.

9