Integra DPS-5.4 instruction manual Rear Panel, Ir In/Out, Jacks

Front & Rear Panels—Continued

Rear Panel

1 2 34 5 6 7 8 9J K

AIR IN/OUT (21)

The IR IN connector can be used to connect a com- mercially available IR receiver, which can be used to pickup signals from the remote controller when the DPS-5.4 is located in another room, installed in a rack, or is out of range of the remote controller The IR OUT connector can be used to connect a commercially available IR emitter, which can be used to pass remote controller signals received by the IR IN along to other AV components.

BOPTICAL DIGITAL AUDIO OUTPUT [19]

This optical digital audio output can be connected to an optical digital audio input on a hi-fi amp, AV receiver, or surround sound decoder (Dolby Digital, DTS).

CCOAXIAL DIGITAL AUDIO OUTPUT [19]

This coaxial digital audio output can be connected to a coaxial digital audio input on a hi-fi amp, AV receiver, or surround sound decoder (Dolby Digital, DTS).

D jacks [20]

These (Remote Interactive) connectors can be

connected to the connectors on your other Inte- gra/Onkyo AV components for interactive control. For remote control operation, you must make an analog RCA/phono connection between your DPS-

5.4and the other AV component, even if they are connected digitally.

EANALOG AUDIO OUTPUT [18]

These RCA/phono connectors can be connected to the analog audio inputs on your TV, hi-fi amp, AV receiver.

FRS 232

This RS-232 port can be connected to an external controller.

GCOMPONENT 2 VIDEO OUTPUT [19]

These BNC connectors can be used to connect a TV or projector with BNC component video inputs.

HCOMPONENT 1 VIDEO OUTPUT [19]

These RCA/phono connectors can be used to con- nect a TV, projector or AV receiver with component video inputs.

IVIDEO OUTPUT [18]

These RCA/phono connectors can be used to con- nect TVs, projectors or AV receivers with composite video inputs.

JS VIDEO OUTPUT [19]

These connectors can be used to connect TVs or projectors with S-Video inputs.

KAC INLET [22]

The supplied power cord is connected here. The other of the power cord should be connected to a suitable wall outlet.

14