Integra DPS-5.4 instruction manual Connecting -compatible Components

Connecting the DPS-5.4—Continued

1.Connect one of DIGITAL AUDIO OUTPUT jacks on this player to a digital input on your AV receiver.

OPTICAL COAXIAL

AV receiver

This enables you to listen to surround sound.

For an optical connection, use an optical cable (not sup- plied) to connect the “OPTICAL DIGITAL AUDIO OUTPUT” jack to an optical input on your AV receiver. For a coaxial connection, use a coaxial cable (similar to the supplied video cable) to connect the “COAXIAL DIGITAL AUDIO OUTPUT” jack to a coaxial input on your AV receiver.

2.Connect the analog AUDIO OUTPUT L/R and VIDEO OUTPUT jacks on this player to a set of analog audio and video inputs on your AV receiver.

AV receiver

DVD

IN

FRONT

L

R

The diagram shows standard video connections, but you can alternatively use the S-Video or component video connections if they’re available.

3.Connect the AV receiver’s video output to a video input on your TV.

Tip:

•The DPS-5.4 has two composite video output connec- tors and two pairs of stereo analog audio output con- nectors. They output the same video and audio signals respectively.

•You usually have to connect the same kind of video cable between your DVD player and AV receiver, and between your AV receiver and TV.

Connecting -compatible

Components

IN

	L
REMOTE
CONTROL	R

DVD

AV receiver

•The remote controller supplied with Integra/Onkyo AV receiver or amplifiers can be used to control the DPS-5.4.

•The function of the upper and lower connectors are the same. Connect to either one.

•For remote control operation, you must make an ana- log RCA/phono connection between your DPS-5.4 and the AV receiver or amplifier, even if they are con- nected digitally.

20