Integra DSR-4.8 instruction manual Rear Panel

Front & Rear Panels—Continued

Rear Panel

￿ ￿ ￿ ￿ ￿ ￿ ￿

￿￿ ￿￿ ￿￿￿￿￿￿ ￿￿ ￿￿

￿SPEAKERS [18]

These terminal posts are for connecting your front speakers.

￿HDMI IN/OUT [26]

HDMI (High Definition Multimedia Interface) con- nections carry digital audio and digital video.

The HDMI input is for connecting components with HDMI outputs. The HDMI output is for connecting a TV or projector with an HDMI input.

￿COMPONENT VIDEO OUTPUT [24]

These jacks output component video and can be connected to an component video input on a TV or projector.

￿VIDEO OUTPUT [23]

This RCA connector can be used to connect a TV or projector with a composite video input.

￿FM ANTENNA [18]

This jack is for connecting an FM antenna.

￿AM ANTENNA [19]

These push terminals are for connecting an AM antenna.

￿AC INLET [28]

The supplied power cord is connected here. The other of the power cord should be connected to a suitable wall outlet.

￿OPTICAL DIGITAL AUDIO IN [25]

This optical digital audio input can be connected to an optical digital audio output on a DVD recorder, or game console.

This input is assigned for VIDEO 1 INPUT in default.

If you output audio from this input during VIDEO 2/DOCK INPUT is selected, you must change the “Video2 Input” setting to “OPT” from “Coax” (page 54).

￿COAXIAL DIGITAL AUDIO IN [25]

This coaxial digital audio input can be connected to a coaxial digital audio output on a DVD recorder or game console.

This input is assigned for VIDEO 2/DOCK INPUT in default.

If you output audio from this input during VIDEO 1 INPUT is selected, you must change the “Video1 Input” setting to “Coax” from “OPT” (page 54).

￿￿ REMOTE CONTROL [25]

This (Remote Interactive) jack can be con-

nected to an jack on Onkyo RI Dock. The DVD receiver remote controller can then be used to con-

trol the RI Dock. To use , you must make an analog audio connection (RCA) between the DVD receiver and the RI Dock, even if they are connected digitally.

￿￿VIDEO 1 INPUT [24]

Here you can connect other video equipment. Input jacks include composite video and analog audio input.

￿￿VIDEO 2/DOCK INPUT [25]

Here you can connect Onkyo RI DOCK or other video equipment. Input jacks include composite video and analog audio input.

￿￿SUBWOOFER PRE OUT [18]

A powered subwoofer can be connected here.

￿￿RS232

This port is for connecting the DVD receiver to external controllers.

￿￿IR IN/OUT [27]

A commercially available IR receiver can be con- nected to the IR IN jack, allowing you to control the DVD receiver when it’s out of sight, for example, installed in a cabinet.

A commercially available IR emitter can be con- nected to the IR OUT jack to pass IR (infrared) remote control signals along to other components.

14