Troubleshooting—Continued

HDMI Status Mode

If you’re using an HDMI connection and there’s no picture or sound, you can check the status of the HDMI connection by pressing and holding down the DVD receiver’s [Display] button for 10 seconds until a message ID appears on the display. Look up the message ID in the following tables and check the HDMI connections and settings on both the DVD receiver and the connected component.

HDMI connection and HDMI-related settings status

 

Displayed ID

Message

 

 

 

 

MSG ID 001

Turn the DVD receiver and the connected component off, then turn them on again. Make sure that

 

the connected component is working properly and that the DVD receiver’s HDMI settings are con-

 

MSG ID 015

 

figured suitably for that component.

 

 

 

 

 

 

MSG ID 021

Input is selected other than DVD or VIDEO1. No output from HDMI OUT.

 

 

 

 

MSG ID 022

When the DVD or VIDEO1 input is selected, the “HDMI Output Setting” is set to “Off”. Change it to

 

“On” (page 30).

 

 

 

 

 

 

MSG ID 023

Check the settings and connections of the TV and component connected to DVD receiver.

 

 

 

No picture from the HDMI connection

 

 

 

 

Displayed ID

Message

 

 

 

 

MSG ID 002

The “HDMI Output Setting” is set to “Off”. Change it to “On” (page 30).

 

 

 

 

MSG ID 003

The HDMI cable may not be connected properly. Check the connection. Also, make sure the HDMI

 

MSG ID 004

input on the TV is correctly configured to received HDMI.

 

 

 

 

 

Make sure the HDMI input on the TV is correctly configured to received HDMI.

 

 

The connected component may not support HDCP. Make sure the connected component supports

 

MSG ID 005

HDCP.

 

MSG ID 006

Turn the DVD receiver and the connected component off, then turn them on again.

 

MSG ID 007

The DVD receiver may be connected to the other component’s DVI jack. Some TVs may not prop-

 

 

erly receive the video output by the DVD receiver. Also, with a DVI connection, there will be no

 

 

sound.

 

 

 

 

MSG ID 008

The DVD receiver’s “HD Resolution” setting is set to “720p” or “1080i”. If your TV doesn’t support

 

these resolutions, select another resolution (page 30).

 

 

 

 

 

 

MSG ID 009

The connected component may not be receiving the HDMI signal properly.

 

Try selecting another resolution on the DVD receiver (page 30).

 

 

 

 

 

No sound from the HDMI connection

 

 

 

 

Displayed ID

Message

 

 

 

 

MSG ID 011

The connected component may not support 96 kHz PCM. Set the DVD receiver’s “Linear PCM

 

MSG ID 014

Out” setting to “Down Sample On” (page 61).

 

 

 

 

MSG ID 012

The connected component may not support Dolby Digital. Set the DVD receiver’s “Digital/HDMI

 

MSG ID 013

Audio Out” setting to “PCM” (page 61).

 

 

 

 

MSG ID 016

The connected component may not support DTS. Set the DVD receiver’s “Digital/HDMI Audio Out”

 

MSG ID 017

setting to “PCM” (page 61).

 

 

 

 

MSG ID 020

Audio from SACDs is not output by the HDMI OUT.

 

 

 

73

Page 72 Page 74
Page 73
Image 73
Integra DSR-4.8 instruction manual Hdmi Status Mode, No picture from the Hdmi connection, Displayed ID Message, Hdcp
Page 72 Page 74

DSR-4.8 specifications

The Integra DSR-4.8 is a powerful and versatile multi-zone audio/video receiver that targets home theater enthusiasts and audiophiles alike. This advanced receiver is engineered to offer exceptional sound quality and system flexibility, making it an ideal centerpiece for immersive entertainment experiences in medium to large spaces.

One of the standout features of the Integra DSR-4.8 is its impressive audio capabilities. It supports a robust 9.2-channel configuration, allowing for a comprehensive surround sound setup that can accommodate various speaker configurations. The receiver touts high-resolution audio support, including formats like Dolby Atmos and DTS:X, ensuring that users enjoy a cinematic sound experience with remarkable detail and clarity. With integrated Dirac Live room correction technology, the DSR-4.8 adjusts the audio output for optimal performance based on the room’s acoustics.

In terms of video performance, the DSR-4.8 supports 4K Ultra HD video passthrough, allowing it to easily integrate with modern 4K sources. It comes equipped with multiple HDMI inputs, including support for HDCP 2.3, ensuring compatibility with the latest devices and formats. Additionally, the receiver is built to handle advanced video processing, featuring technologies like HDR, Dolby Vision, and HLG for enhanced picture quality and vibrant, lifelike visuals.

The Integra DSR-4.8 is also designed for seamless connectivity. With built-in Wi-Fi and Bluetooth capabilities, users can stream music directly from their smartphones or tablets. The receiver supports various streaming platforms, giving users access to thousands of internet radio stations and popular music streaming services. This open connectivity extends to its compatibility with smart home systems, making it easy to integrate into a wider home automation setup.

In terms of user interface, the DSR-4.8 features an intuitive on-screen display and a user-friendly remote control. The receiver also allows for custom zone configurations, enabling users to enjoy different audio sources in separate areas of their homes.

In summary, the Integra DSR-4.8 combines high-performance audio and video capabilities with flexible connectivity options, making it a fantastic choice for those looking to elevate their home entertainment experience. Its advanced technologies and thoughtful design ensure that users can enjoy both superior sound and visual quality, making it a worthy investment for any home theater setup.
Top Page Image Contents