Integra DSR-4.8 instruction manual Connecting an RI Dock, Digital Audio Connection

Connecting the DVD receiver—Continued

Connecting an RI Dock

■ iPod with video or RI Dock with the OSD mode ■ iPod without video

Connect your RI Dock’s analog audio output jacks and Video output jack to the DVD receiver’s VIDEO 2/DOCK INPUT L/R jacks and V jack.

Connect the RI Dock with an cable. (Onkyo DS-A1X/A2/A2X hookup shown below.)

Connect your RI Dock’s analog audio output jacks to the DVD receiver’s VIDEO 2/DOCK INPUT jacks.

Connect the RI Dock with an cable. (Onkyo DS-A1 hookup shown below.)

Notes:

•Set the RI Dock’s RI MODE switch to HDD or HDD/DOCK.

•Press the Input []/[ ] buttons to select “VIDEO2/DOCK”.

•Refer to the RI Dock’s instruction manual.

Digital Audio Connection

You can use optical/coaxial digital cable instead of the audio cable when connecting with other AV components. Connect your AV component’s digital audio output jack to corresponding COAXIAL or OPTICAL DIGITAL AUDIO IN jack of the DVD receiver.

You must assign that jack to an input (see page 56).

OPTICAL COAXIAL	VIDEO
	OUT

Set top box,

VCR, DVD

Recorder

Connect one or the other

Notes:

•Optical digital audio input is assigned for VIDEO 1 INPUT in default.

If you output audio from this input during VIDEO 2/ DOCK INPUT is selected, you must change the “Video2 Input” setting to “OPT” from “Coax”.

•Coaxial digital audio input is assigned for VIDEO 2/ DOCK INPUT in default.

If you output audio from this input during VIDEO 1 INPUT is selected, you must change the “Video1 Input” setting to “Coax” from “OPT”.

25