Integra DSR-4.8 Controlling Other Components, Controlling a TV connected to the DVD receiver

Controlling Other Components

Controlling a TV connected to the DVD receiver

You can control a TV. You must enter the appropriate remote control code first.

Number buttons

TV

Enter

4Point the remote controller at the TV, and check the operation.

If the remote controller doesn’t work as expected, and several remote codes are listed, try each one in turn and use the one that works best.

Note:

The remote control codes provided are correct at the time of printing, but are subject to change.

Controlling a TV

To control a TV, point the remote controller at it and use the buttons explained below. With some TVs, certain buttons may not work as expected, and some may not work at all.

Entering Remote Control Codes

1Look up the appropriate remote control code in the “Remote Con- trol Codes list” at the end of this manual.

2Hold down the TV [ ] and [Enter] buttons for about 3 sec-

onds.

HOLD

HOLD

3Within 30 seconds, use the num-

ber buttons to enter the 4-digit remote control code.

￿￿ ￿

￿

￿TV [ ] button

Sets the TV to Standby or On.

￿TV [Input] button

Selects the TV’s AV input.

￿ TV VOL []/[ ] button

Adjusts the TV’s volume.

￿TV [CH +/–] button

Selects channels on the TV.

52