Integra DTR-8.2 instruction manual Connecting antennas, Assembling the AM loop antenna

Models: DTR-8.2

1 88
Download 88 pages 54.8 Kb
Page 26
Image 26

Connecting antennas

To use the tuner of DTR-8.2, it is necessary to prepare the supplied FM and AM antennas.

Adjustment and placement of the FM and AM antennas for better reception must be done while listening to a station broadcast.

If better reception cannot be obtained, then placement of an outside antenna is recommended.

Assembling the AM loop antenna

Assemble the loop antenna as shown in the illustration.

Refer to “Connecting the AM loop antenna” below for details on connecting the loop antenna.

Insert into the hole.

Connecting the AM antenna cable

1.Press down the lever.

2.Insert the wire into the hole.

3.Release the lever.

1

2

3

Connecting the included antennas

Connecting the FM indoor antenna:

The FM indoor antenna is for indoor use only. During use, extend the antenna and move it in various directions until the clearest signal is received. Fix it with push pins or similar implements in the position that will cause the least amount of distortion.

If the reception is not very clear with the attached FM indoor antenna, the use of an outdoor antenna is recommended.

Connecting the AM loop antenna:

The AM loop antenna is for indoor use only. Set it in the direction and position where you receive the clearest sound. Put it as far away as possible from the DTR-8.2, televisions, speaker cables, and power cords.

When reception is not satisfactory with the attached AM loop antenna alone, connection of an outdoor antenna is recommended.

FM antenna

(Indoor) AM loop antenna

RE OUT

 

 

AUDIO

L

 

ANTENNA

 

 

 

CENTER

R

L

 

 

 

 

 

AM

 

 

 

FM

 

 

 

75

 

Strip away the insulation from the end of the cable, then fully insert the stripped end of the cable.

Hint:

Either of the split ends of the AM antenna can be connected to either terminal. Unlike speaker cabling, there is no polarity for AM broadcast signals.

26

Page 26
Image 26
Integra DTR-8.2 instruction manual Connecting antennas, Assembling the AM loop antenna, Connecting the AM antenna cable

DTR-8.2 specifications

The Integra DTR-8.2 is a high-performance A/V receiver that stands at the crossroads of functionality and sophistication, designed for the discerning audiophile and home theater enthusiast. This powerful receiver offers a robust suite of features and technologies that enhance the listening experience while seamlessly integrating into modern home entertainment setups.

One of the standout features of the DTR-8.2 is its advanced power amplification. With a 9.2 channel configuration, it delivers a potent output, ensuring that every movie, concert, or gaming session is filled with immersive sound. The receiver is equipped with high-current amplification and features a robust power supply, which works in tandem to deliver clear, dynamic audio even at high volumes.

In terms of audio processing, the DTR-8.2 supports Dolby Atmos and DTS:X, two cutting-edge technologies that create a three-dimensional sound environment. This immersive audio experience is further enhanced by its support for various high-resolution audio formats, allowing music lovers to enjoy studio-quality playback of their favorite tracks.

The receiver also features integrated network capabilities, with built-in Wi-Fi and Ethernet connectivity. This allows users to access a wide range of streaming services, including popular platforms like Spotify, Amazon Music, and Tidal. With Chromecast built-in, AirPlay 2, and DTS Play-Fi support, streaming high-quality audio from various devices has never been easier.

Another noteworthy characteristic of the DTR-8.2 is its comprehensive HDMI connectivity. It includes multiple HDMI inputs and outputs that support 4K/60Hz video, HDR10, Dolby Vision, and HDCP 2.2, making it compatible with the latest video formats and ensuring that users are future-proofed against evolving technology.

The Integra DTR-8.2 also incorporates room calibration technology, namely MCACC (Multi-Channel Acoustic Calibration System), which fine-tunes audio output to suit the specific acoustics of the listening space. This ensures that every listener receives an optimal sound experience, regardless of the room's layout.

In conclusion, the Integra DTR-8.2 is a multifaceted A/V receiver that combines cutting-edge audio and video technologies with user-friendly features. Its combination of power, versatility, and high-tech integrations makes it an ideal centerpiece for any home theater system, catering to those who seek both quality and performance in their audio-visual experiences.