Getting Started
4. Operate a Device
You operate devices using three kinds of buttons:
■Touchscreen buttons
■Left and Right button (below the touchscreen)
■
Using the Left and Right button
The Left and Right buttons change function depending on the device the remote controller is operating. The current function is displayed on the touchscreen right above the button. The function can be either an IR (infrared) command that is transmitted, or a jump to a specific device page.
IR commands
Using touchscreen buttons
Sending commands
By touching the touchscreen buttons you send commands to the
device you have selected. When you send a command, the remote | Device pages |
| |
controller icon shows transmitting signals . The name of the active |
|
device is indicated on the device tab. |
|
Scrolling
Most devices have more than one control panel. You can scroll
through these control panels using and . The panel number on the left bottom of the screen indicates the panel number and the
total number of panels, for example .
By touching and holding a scroll button, you go repeatedly through all the control panels of a device in a loop.
Operating a device without affecting the active device
You can operate a device while another device is active (for example, rewinding your VCR while watching TV) via the Device menu:
1.Open the device menu.
2.Press and hold the Left or Right button (labeled NO
IR).
The remote controller icon turns around .
3.Tap the device you want to operate.
The device control panel appears and the remote controller icon turns to its original position. You can now operate the new selected device without affecting the active device.
Using the direct-access buttons
MUTE, CH and VOL can be operated at any time, even without turning on the touchscreen.
5. Adjust the Settings
Most of the remote controller’s features can be set to your own needs.
1.Touch and hold the remote controller icon for a few seconds.
The first setup panel appears. You can see the second and third setup panel by using the scroll buttons.
2.Tap the button of the setting you want to adjust.
The button becomes black.
3.Use the Left and Right button to adjust the setting.
Note:
Tap the Left and Right buttons are repeating buttons; holding down one of these buttons will increase or decrease a value repeatedly.
70