63
2. Charging the Remote Controller

AA batteries

1. Slide the battery cover off the back of the remote
controller.
2. Insert 4 AA batteries (included in package) as
indicated on the bottom of the battery compartment.
3. Slide the battery cover back on.
After a few seconds, the remote controller starts up
automatically and beeps twice to indicate that it is ready to use.
When batteries are running low, the Low Battery icon blinks at
the center top of the display. Replace the batteries as soon as possible
to ensure perfect performance.
Note:
The remote controller retains all settings when batteries have run out
or when you replace them. You will only have to reset the clock.
Introduction

Optional recharging dock

Warning:
Use the recharging dock only with the NiMH rechargeable battery
pack of BCC-5.
1. Slide the battery cover off the back of the remote
controller.
2. Remove the plastic AA battery tray from the battery
compartment.
3. Insert the battery pack (included with the recharging
dock) as indicated on the side of the battery pack.