ADE-9040 User’s Manual

3.1.2 Installing Intel µFC-LGA 775 CPU Fan, and Heat Sink

•The Intel µFC-LGA 775 CPU heat sink and fan assembly comes in a push-pin design and requires no tool to install.

•Place the fan with heat sink right above the CPU and make sure four pins matching the holes of the board. (8, 9)

•Press all push-pins down and rotate them to lock. (Please check the rear side of the board.)

•Place the CPU fan connector.

9

8

Push-pin Board’s hole

CPU fan connector

3.1.3 Removing CPU

•Disconnect the CPU fan connector.

•Remove the CPU fan and heat sink first.

•Unlock the Intel µFC-LGA 775 Pentium 4 processor.

•Carefully lift up the existing CPU to remove it from the socket.

•Follow the steps of installing a CPU to change to another one.

Warning： For a safety landing, avoid leaving prongs on hard surface.

Instructions：Smear thermal grease on the top of the CPU. Lower the CPU fan onto the CPU/CPU socket and secure it using the attachments or screws provided on the fan. Finally, attach the fan power cable to the CPUFAN adapter. For more details on this, go to http://www.intel.com

23 / 55