ADE-9040 User’s Manual

3.3Installing the ATX Mother Board

To install your ADE-9040 into standard chassis or proprietary environment, you need to perform the following steps:

1.Check all jumpers setting on proper position

2.Install and configure CPU and memory module on right position

3.Place ADE-9040 into the dedicated position in your system

4.Attach cables to existing peripheral devices and secure it

NOTE: Please refer section 3.4 to install display and Ethernet drivers and setup your system.

WARNING: Please ensure that your ATX Main Board properly inserted and fixed by mechanism. Otherwise, the system might be unstable or do not work from bad contact of golden finger.

3.4.1 Dual Marvell Gigabit Ethernet Controllers

Dual Marvell Gigabit Ethernet 10/100/1000BASE-TX controllers by PCI Express.

The ADE-9040 provides dual LED indicators on RJ-45 connectors to show LAN interface status. These messages will give you a guide for troubleshooting.

Yellow LED indicates transmit and receive activity.

Blinking: indicates transmit/receive activity

On: indicates no activity but link is valid

Off: link is invalid

Green LED indicates Link speed

On: link speed at 1000Mbps

On: link speed at 100Mbps

Off: link speed at 10Mbps

3.4.2 Drivers Support

ADE-9040 provide on CD-Title to support on-board VGA and Ethernet device drivers in various operating systems. Before installing the device drivers, please see the reference files in each sub-directory. You cannot install drivers from CD-Title directly.

Intel Q965 Chipset Integrated Graphics supports Win2000, XP, Win2003 and 64bit

Windows environment.

Intel Q965 & ICH8(R) Chipset Driver supports Win2000, XP, Win2003 and 64bit Windows

environment.

Dual Marvell Gigabit Ethernet Controllers support Win2000, XP, Win2003, and 64 bit

Windows environment.

25 / 55