ADE-9040 User’s Manual

2.Hardware Configuration Setting

This chapter gives the definitions and shows the positions of jumpers, headers and connectors. All of the configuration jumpers on ADE-9040 are in the proper position. The default settings shipped from factory are marked with an asterisk ().

In general, jumpers on the ATX Main Board are used to select options for certain features. Some of the jumpers are designed to be user-configurable, allowing for system enhancement. The others are for testing purpose only and should not be altered. To select any option, cover the jumper cap over (SHORT) or remove (NC) it from the jumper pins according to the following instructions. Here, NC stands for “Not Connect”.

2.1Board Layout

15 / 55