ADE-9040 User’s Manual

4.1.2.2 IDE Configuration

4.1.2.2.1SATA#1 Configuration Option: [Disabled], [Enhanced].

4.1.2.2.2Configure SATA#1 as Option: [IDE], [RAID]

4.1.2.2.3Primary/Secondary IDE Master/Slave

Select one of the hard disk drives to configure it. Press <Enter> to access its the sub menu. The options on the sub menu are described in the following sections.

4.1.2.2.4Hard Disk Write Protect

Set this option to protect the hard disk drive from being overwritten. The Optimal and Fail-Safe default setting is Disabled.

4.1.2.2.5IDE Detect Time Out (Sec)

Set this option to stop the AMIBIOS from searching for IDE devices within the specified number of seconds. Basically, this allows you to fine-tune the settings to allow for faster boot times. Adjust this setting until a suitable timing that can detect all IDE disk drives attached is found.

The options: 0, 5, 10, 15, 20, 25, 30, 35 sec.

30 / 55