ADE-9040 User’s Manual

4.1.6.1 North Bridge Configuration

You can use this screen to select options for the North Bridge Configuration. Use the up and down <Arrow> keys to select an item. Use the <Plus> and <Minus> keys to change the value of the selected option.

Note: The North Bridge Configuration setup screen varies depending on the supported North Bridge chipset.

4.1.6.1.1Memory Remap Feature

ENABLE: Allow remapping of overlapped PCI memory above the total physical memory.

DISABLE: Do not allow remapping of memory.

4.1.6.1.2DRAM Frequency

The item allows you to set the DRAM frequency.

4.1.6.1.3Configure DRAM Timing by SPD

Select the operating system that is selecting DRAM timing, so select SPD for setting DRAM timing by SPD.

The choice: [Enable], [Disable]

4.1.6.1.4Initate Graphic Adapter

Select which graphics controller to use as the primary boot device.

4.1.6.1.5Internal Graphics Mode Select

Select the amount of system memory used by the internal graphics device.

51 / 55