ADE-9040 User’s Manual

4.1.2.8 Remote Access Configuration4.1.2.8.1Remote Access

You can disable or enable the BIOS remote access feature here.

4.1.2.8.2Serial Port Number

Select serial port for console redirection. Make sure the selected port is enabled.

4.1.2.8.3Flow Control

Select Flow Control for console redirection.

4.1.2.8.4Redirection after BIOS POS

Disable: Turns off the redirection after POST Boot Loader: Redirection is active

during POST and during Boot Loader. Always: Redirection is always active. (Some OSs may not work if set to Always)

[Enabled] - keep it, [Disabled]- deactivate

4.1.2.8.5Terminal Type Select the target terminal type.

4.1.2.8.6VT-UTF8 Combo Key Support

Enable VT-UTF8 Combination Key Support for ANSI/VT100 terminals.

4.1.2.8.7Sredir Memory Display Delay

Gives the delay in seconds to display memory information.

40 / 55