Intel AIMB-744 user manual Memory, Input/Output, AGP interface, Ethernet LAN

drives or four enhanced IDE devices. Supports PIO mode 4 (16.67MB/s data transfer rate) and ATA 33/66/100 (33/66/100MB/s data transfer rate.) BIOS enabled/disabled.

•Floppy disk drive interface: Supports up to two floppy disk drives, 5¼" (360 KB and 1.2 MB) and/or 3½" (720 KB, 1.44 MB). BIOS enabled/disabled

1.3.2 Memory

•RAM: Up to 4GB in four 184-pin DIMM sockets. Supports dual channel DDR266/333/400 SDRAM

1.3.3 Input/Output

•PCI-X bus : 2 PCI-X slots, 64-bit, 66MHz. PCI 2.2 compliant

•PCI Bus: 4 PCI slots, 32-bit, 33MHz. PCI 2.2 compliant

•Enhanced parallel port: Configured to LPT1, LPT2, LPT3, or dis- abled. Standard DB-25 female connector provided. Supports EPP/SPP/

ECP

•Serial ports: Four RS-232 ports with two DB-9 connectors and two onboard pin headers for extension. Supports speeds up to 115.2 Kbps. Ports can be individually configured to COM1, COM2, COM3, COM4 or disabled

•Keyboard and PS/2 mouse connector: Two 6-pinmini-DIN connec- tors are located on the mounting bracket for easy connection to a key- board and PS/2 mouse.

•USB port: Supports up to four USB 2.0 and transmission rate up to 480Mbps.

1.3.4 AGP interface

• AGP port: One AGP 8X/4X slot, 0.8V and 1.5V only

1.3.5 Ethernet LAN

•Supports single/dual 10/100/1000Base-T Ethernet networking

•Controller:

LAN 1 Intel 82547GI (CSA) LAN 2: Intel 82541GI (PCI)

AIMB-744 User’s Manual 4