Intel AIMB-744 user manual PCI-X 33/66Mhz selection J5 & J6, Watchdog timer output J2

problem. The J2 jumper settings control the outcome of what the com- puter will do in the event the watchdog timer is tripped.

Table 1.4: Watchdog timer output (J2)

Function	Jumper Setting
IRQ11	1
	1-2 closed
* Reset	1
	2-3 closed
* default setting
Note:	The interrupt output of the watchdog timer is a
	low level signal. It will be held low until the
	watchdog timer is reset.

1.8.4 PCI-X 33/66Mhz selection (J5 & J6)

The AIMB-744 contains a PCI-X 33/66Mhz selection that enables the PCI-X slots different modes. The default mode is PCI 33MHz which close both J5 and J6. While close J6 only the slots work in PCI 66MHz mode. To enable PCI-X 66MHz mode, please close J5 only.

Table 1.5: PCI-X 33/66MHz selection (J5&J6)

Function Jumper Setting

*PCI 33MHz

J5-J6

PCI 66MHz

J6 Close

PCI-X 66MHz

J5 Close

13