![](/images/new-backgrounds/1167736/167736119x1.webp)
AP440FX Motherboard Technical Product Specification
Table 38 lists and describes the options that are available if the parallel port mode is ECP.
Table 38. ECP - Compatible Configuration Options
Option
Disable
LPT1, 378, IRQ7, DMA3
LPT2, 278, IRQ7, DMA3
LPT1, 378, IRQ5, DMA3
LPT2, 278, IRQ5, DMA3
LPT1, 378, IRQ7, DMA1
LPT2, 278, IRQ7, DMA1
LPT1, 378, IRQ5, DMA1
LPT2, 278, IRQ5, DMA1
LPT3, 228, IRQ7, DMA3
LPT3, 228, IRQ5, DMA3
LPT3, 228, IRQ7, DMA1
LPT3, 228, IRQ5, DMA1
Auto Configured
Description
Port not enabled
Enabled as LPT1 at indicated I/O address, IRQ, and DMA channel.
Enabled as LPT2 at indicated I/O address, IRQ, and DMA channel.
Enabled as LPT1 at indicated I/O address, IRQ, and DMA channel.
Enabled as LPT2 at indicated I/O address, IRQ, and DMA channel.
Enabled as LPT1 at indicated I/O address, IRQ, and DMA channel.
Enabled as LPT2 at indicated I/O address, IRQ, and DMA channel.
Enabled as LPT1 at indicated I/O address, IRQ, and DMA channel.
Enabled as LPT2 at indicated I/O address, IRQ, and DMA channel.
Enabled as LPT3 at indicated I/O address, IRQ, and DMA channel.
Enabled as LPT3 at indicated I/O address, IRQ, and DMA channel.
Enabled as LPT3 at indicated I/O address, IRQ, and DMA channel.
Enabled as LPT3 at indicated I/O address, IRQ, and DMA channel.
Port will be auto configured (default option)
3.14.7.9USB Interface
Enables or disables the USB interface. The options are:
∙Disabled
∙Enabled default)
3.14.7.10Audio Interface
Enables or disables the onboard audio subsystem. The options are:
∙Disabled
∙Enabled (frees the I/O resources and addresses used to support the audio interface) (default)
3.14.7.11Hardware Monitor Interface
Enables or disables the Hardware Monitor Controller. The options are:
∙Disabled
∙Enabled (default)
3.14.7.12Primary PCI IDE Status
Displays the current status of the Primary PCI IDE Interface from the selectable setting above. This is an informational field and is not accessible.
60