Intel AP440FX specifications Power Management Configuration Subscreen

Motherboard BIOS and Setup Utility

3.14.8.8Memory Error Detection

Sets the type of error detection or correction. The options are:

∙Disabled (default)

∙ECC

∙Parity

This field appears if either ECC or Parity SIMMs are detected. Parity and ECC SIMMs can be configured to run either as Parity or ECC (e.g. Parity SIMMs may be configured to run in ECC mode.)

3.14.8.9Bank 0

Reports the type of memory found in the Bank 0 SIMM slots. There are no options.

3.14.8.10Bank 1

Reports the type of memory found in the Bank 1 SIMM slots. There are no options.

3.14.9Power Management Configuration Subscreen

This section describes the options available on the Power Management Subscreen.

3.14.9.1Advanced Power Management (APM)

Enables or disables the APM support in your computer’s BIOS. The options are:

∙Disabled

∙Enabled (default)

Power Management only works with APM-capable operating systems to manage power consumption in your computer.

3.14.9.2IDE Drive Power Down

Spins down IDE drives when the computer goes into power managed mode. The options are:

∙Disabled

∙Enabled (default)

This field does not appear if APM is disabled.

3.14.9.3VESA Video Power Down

Sets any VESA compliant monitor to be power managed when the computer goes into power managed mode. The options are:

∙Disabled

∙Standby

∙Suspend

∙Sleep (default)

This field does not appear if APM is disabled.

63