Intel AP440FX specifications Advanced Chipset Configuration Subscreen

Motherboard BIOS and Setup Utility

3.14.7.13Secondary PCI IDE Status

Displays the current status of the Secondary PCI IDE Interface from the selectable setting above. This is an informational field and is not accessible.

3.14.7.14Floppy Status

Reports the current status of the floppy drive from the selectable setting above. There are no options.

3.14.7.15Serial Port 1 Status

Reports the current status of serial port 1 from the selectable setting above. There are no options.

3.14.7.16Serial Port 2 Status

Reports the current status of serial port 2 from the selectable setting above. There are no options.

3.14.7.17Parallel Port Status

Reports the current status of the parallel port from the selectable setting above. There are no options.

3.14.8Advanced Chipset Configuration Subscreen

This section describes the options available on the Advanced Chipset Configuration Subscreen.

3.14.8.1Base Memory Size

Sets the size of the base memory. The options are:

∙512 KB

∙640 KB (default)

3.14.8.2ISA LFB Size

Sets the size of the linear frame buffer. The options are:

∙Disabled (default)

∙1 MB

If this is set to 1 MB, the ISA LFB Base Address field appears.

3.14.8.3ISA LFB Base Address

Reports the base address of the LFB. There are no options.

The base address is 16 MB minus the ISA LFB size value. This field does not appear if the ISA LFB Size is set to Disabled.

61