Intel BPC-500-5820 user manual Hardware Monitor, Integrated Peripherals PIM-582version, Both

Hardware Monitor

	ROM PCI/ISA BIOS (2A5IMTPD)
	CPU FEATURE SETUP
	AWARD SOFTWARE, INC.
Current CPU Temperature	: 40 /104
Current CPUFAN1 Speed	: 0 RPM
+12(V) : 12.49 V	Vcc(V) : 5.12 V
Vio(V) : 3.42 V	Vcore(V) 2.22 V
		Esc: Quit	− ↓ → ← : Select Item
		F1 : Help	PU/PD/+/- : Modify
		F5 : Old Values (Shift)F2: Color
		F6 : Load BIOS Defaults
		F7 : Load Setup Defaults

Current CPU Temperature

A onboard sensor underneath the CPU monitors the current CPU temperature.

Current CPU Fan Speed

When using the onboard CPU Fan power connector the board can deduct the actual rounds per minute (RPM) of the installed CPU Fan

+12(V)

Measured external power for Serial port, FAN etc should be ~ +12 V

VCC(V)

Measured external power supply to board should be ~ +5 V

VIO(V)

Measured power to DIMM, Chipset and Slot 1 Cache, should be ~ 3.5 V

VCORE(V)

Measured power to CPU core, depends on type of CPU and jumper settings

Integrated Peripherals (PIM-582 version)

ROM PCI/ISA BIOS (2A5IMTPD)
	INTEGRATED PERIPHERALS
	AWARD SOFTWARE, INC.
Internal PCI/IDE			Both	Onboard Parallel Mode		: ECP
		:
IDE Primary Master PIO		: Auto		ECP Mode Use DMA		: 3
IDE Primary Slave PIO		: Auto		Onboard Serial Port 3		: 3E8H
IDE Secondary Master PIO		: Auto		Serial Port 3 Use IRQ		: IRQ11
IDE Secondary Slave PIO		: Auto		Onboard Serial Port 4		: 2E8H
Primary Master UltraDMA		: Auto		Serial Port 4 Use IRQ		: IRQ10
Primary Slave UltraDMA		: Auto		PS/2 mouse function		:
Secondary Master UltraDMA		: Auto		Enabled
Secondary Slave UltraDMA		: Auto		USB Controller		:
IDE Burst Mode	:
Enabled
IDE Data Port Post Write	:			Esc: Quit	− ↓ → ←	: Select Item
Disabled
IDE HDD Block Mode	:			F1 : Help	PU/PD/+/- : Modify
Enabled
				F5 : Old Values (Shift)F2: Color
Onboard FDD Controller	:

Integrated Peripherals (PIM-582C version)

ROM PCI/ISA BIOS (2A5IMTPD)

INTEGRATED PERIPHERALS

AWARD SOFTWARE, INC.

Internal PCI/IDE		Onboard Parallel Mode		: ECP
	:
Both		ECP Mode Use DMA		: 3
IDE Primary Master PIO	:	Onboard Serial Port 3		: 3E8H
Auto		Serial Port 3 Use IRQ		:
IDE Primary Slave PIO	:	IRQ11
Auto		Onboard Serial Port 4		: 2E8H
IDE Secondary Master PIO	:	Serial Port 4 Use IRQ		:
Auto		IRQ10
IDE Secondary Slave PIO	:	PS/2 mouse function		:
Auto		Enabled
Primary Master UltraDMA	:
Auto
		Esc: Quit	− ↓ → ←	: Select
Primary Slave UltraDMA	:
		Item
Auto
Secondary Master UltraDMA	:	F1 : Help	PU/PD/+/- : Modify
Auto		F5 : Old Values (Shift)F2: Color

BPC-500-5820 User's Manual 23