Intel Desktop Board D810EMO/MO810E Technical Product Specification

1.1 Overview

1.1.1Feature Summary

Table 1 summarizes the D810EMO/MO810E board’s major features.

Table 1. Feature Summary

Form Factor

Processor

Memory

Chipset

Direct AGP Video

Audio

I/O Controller

Peripheral

Interfaces

Serial Debug

Port

Expansion capabilities

Management Level 4 Support

Instantly

Available PC

BIOS

FlexATX (9.0 inches by 7.5 inches)

Support for either an Intel®Pentium®III processor in a Flip Chip Pin Grid Array (FC-PGA) package or an Intel®Celeron™ processor in an FCPGA package or a PPGA package

∙One 168-pin dual inline memory module (DIMM) socket

∙Supports up to 256 MB of 100 MHz non-ECC synchronous DRAM (SDRAM)

∙Support for serial presence detect (SPD) and non-SPD DIMMs

Intel®810E chipset, consisting of:

∙Intel®82810E DC-133 Graphics/Memory Controller Hub (GMCH)

∙Intel®82801AA I/O Controller Hub (ICH)

∙Intel®82802AB 4 Mbit Firmware Hub (FWH)

∙Intel 82810E DC-133 GMCH

∙4 MB of display cache

∙VGA port connector on back panel

Audio Codec ’97 (AC ’97) compatible audio subsystem, consisting of the following:

∙Creative Sound Blaster† AudioPCI 128V digital audio controller (ES1373D)

∙Crystal Semiconductor CS4297A analog codec

SMSC LPC47M102 SIO low pin count (LPC) interface I/O controller

∙Up to four universal serial bus (USB) ports

∙Two IDE interfaces with Ultra DMA support One 9-pin stake-pin serial debug port connector

One PCI bus connector at PCI slot 5 location

∙Intel®82559 local area network (LAN) controller

∙Hardware monitor

∙Support for PCI Local Bus Specification, Revision 2.2

∙Suspend-to-RAM support

∙Wake on USB ports

∙Intel®/AMI BIOS stored in an Intel 82802AB 4 Mbit firmware hub (FWH)

∙Support for Advanced Configuration and Power Interface (ACPI), Plug and Play, and SMBIOS

✏NOTE

The D810EMO/MO810E board is designed to support only USB-aware operating systems.

10