Intel Desktop Board D810EMO/MO810E Technical Product Specification

2.8 Connectors

CAUTION

Only the back panel I/O connectors of the board have overcurrent protection. The internal board connectors are not overcurrent protected, and should connect only to devices inside the computer chassis, such as fans and internal peripherals. Do not use these connectors for powering devices external to the computer chassis. A fault in the load presented by the external devices could cause damage to the computer, the interconnecting cable, and the external devices themselves.

This section describes the board’s connectors. The connectors can be divided into the following groups:

Back panel I/O connectors (see page 39)

USB (2)

VGA

LAN

Audio line out

Mic in

Internal I/O connectors (see page 41)

Fans (2)

IDE (2)

Serial debug port

Power

PCI

ATAPI CD-ROM

External I/O connectors (see page 46)

USB ports

Front panel (Power/Sleep/Message waiting LED, power switch, hard drive activity LED, reset switch, and infrared port)

38