Intel Desktop Board D810EMO/MO810E Technical Product Specification
2.10.2I/O Shield
The back panel I/O shield for the board must meet specific dimension and material requirements. Systems based on this board need the back panel I/O shield to pass certification testing. Figure 9 shows the critical dimensions of the I/O shield. Dimensions are given in inches [millimeters]. For dimensions given to two decimal places, the tolerance is ±0.02 inches (±5.08 millimeters). The figure indicates the position of each cutout. Additional design considerations for I/O shields relative to chassis requirements are described in the ATX specification. See Section 1.3 for information about the ATX specification.
0.00 | 0.33 Dia(2) | |
[8.50] | ||
|
0.47[12.03]
0.46[11.80]
0.68
[17.32]
0.66[16.86]
0.00 | 0.80 | [20.57] | 1.64 | [41.89] | 4.37 | [111.14] | 5.32 | [135.15] | 5.82 | [147.90] |
OM08930
Figure 9. I/O Shield Dimensions
52