Intel Desktop Board D810EMO/MO810E Technical Product Specification

Table 56. Boot Menu (continued)

Feature

First Boot Device

Second Boot Device

Third Boot Device

Fourth Boot Device

4IDE Drive Configuration

Primary Master IDE

Primary Slave IDE

Secondary Master IDE

Secondary Slave IDE

Options

∙ARMD-FDD (Note 1)

∙ARMD-HDD (Note 2)

∙IDE-HDD

∙ATAPI CDROM

∙Intel UNDI,

PXE 2.0 (Note 3)

∙Disabled

∙1st IDE (default)

∙2nd IDE

∙3rd IDE

∙4th IDE

Description

Specifies the boot sequence according to the device type. The computer will attempt to boot from up to four devices as specified here. Only one of the devices can be an IDE hard disk drive.

To specify the boot sequence:

1.Select the boot device with <−> or <↓>.

2.Press <Enter> to set the selection as the intended boot device.

The default settings for the first through fourth boot devices are, respectively:

∙ATAPI CDROM

∙IDE-HDD

∙Intel UNDI, PXE 2.0 (build 071)

∙Disabled

NOTE: To configure the computer to boot from an IDE hard disk drive, set a boot device in this Setup feature to IDE-HDD. Determine the IDE channel, and master or slave mode of the drive. Then, in the next Setup feature, IDE Drive Configuration, set that channel and mode to 1st IDE.

1st IDE specifies the IDE hard disk drive to boot from. The 2nd through 4th IDE settings are ignored. See the note above for more information.

To specify the drive to boot from:

1.Use <−> or <↓> to select the channel, and master or slave mode of the drive to boot from.

2.Press <Enter>.

3.Use <−> or <↓> to select 1st IDE.

4.Press <Enter> to set the selection.

Notes:

1.ARMD-FDD = ATAPI removable device - floppy disk drive (LS-120)

2.ARMD-HDD = ATAPI removable device - hard disk drive

3.UNDI = Universal network interface card (NIC) driver interface PXE = Pre-boot execution environment

86