Line out (back panel) Mic in (back panel)
ATAPI CD-ROM (connects an internal ATAPI CD-ROM drive to the audio mixer)

Intel Desktop Board D810EMO/MO810E Technical Product Specification

1.10.4Audio Connectors

The audio connectors include the following:

∙

∙

∙

For information about

The back panel audio connectors

The location of the ATAPI CD-ROM connector

The signal names of the ATAPI CD-ROM connector

Refer to

Section 2.8.1, page 39

Figure 5, page 41

Table 29, page 45

1.11 Hardware Monitor Component

The hardware monitor component provides low-cost instrumentation capabilities. The features of the component include:

∙Internal ambient temperature sensing

∙Remote thermal diode sensing for direct monitoring of processor temperature

∙Power supply monitoring (+12, +5, +3.3, +2.5, VCCP) to detect levels above or below acceptable values

∙SMBus interface

∙The hardware monitor component enables the board to be compatible with the Wired for Management (WfM) specification.

For information about

Refer to

The board’s compatibility with the WfM specification

Table 2, page 13

 

 

24