Intel ECB-862 Note:, ECB-862/862L, 4.5.3.13APIC Mode, 4.5.3.12Security Option, 4.5.3.14OS Select for DRAM, 4.5.3.9Typematic Rate Setting, 4.5.3.11Typematic Delay (Msec)

ECB-862/862L

4.5.3.9Typematic Rate Setting

Key strokes repeat at a rate determined by the keyboard controller. When enabled, the typematic rate and typematic delay can be selected.

The choice: Enabled/Disabled.

4.5.3.10Typematic Rate (Chars/Sec)

Sets the number of times a second to repeat a key stroke when you hold the key down.

The choice: 6, 8, 10, 12, 15, 20, 24, 30.

4.5.3.11Typematic Delay (Msec)

Sets the delay time after the key is held down before it begins to repeat the keystroke. The choice: 250, 500, 750, and 1000.

4.5.3.12Security Option

Select whether the password is required every time the system boots or only when you enter setup.

System

The system will not boot and access to Setup will be denied if the correct password is not entered at the prompt.

Setup

The system will boot, but access to Setup will be denied if the correct password is not entered at the prompt.

Note: To disable security, select PASSWORD SETTING at Main Menu and then you will be asked to enter password. Do not type anything and just press <Enter>, it will disable security. Once the security is disabled, the system will boot and you can enter Setup freely.

4.5.3.13APIC Mode

The BIOS supports versions 1.4 of the Intel multiprocessor specification. When enabled, The MPS Version 1.4 Control for OS can be activated.

The choice: Enabled/Disabled.

4.5.3.14OS Select for DRAM > 64

Select the operating system that is running with greater than 64MB of RAM on the system.

The choice: Non-OS2, OS2.

ECB-862/862L User’s Manual 49