Intel ECB-862 User’s Manual, 4.5.5.8POWER ON Function, 4.5.5.11UART Mode Select, 4.5.5.12RxD , TxD Active, 4.5.5.9Onboard FDC Controller, 4.5.5.10Onboard Serial Port 1 &

User’s Manual

4.5.5.8POWER ON Function

This field allows you to use the keyboard to power-on the system. Use Table 3 to configure this function.

Item	Options	Description
		When this option is selected, move the cursor to the "KB
		Power On Password" field and press <Enter>. Enter your
Password	Press Enter	password. You can enter up to 5 characters. Type in
		exactly the same password to confirm, then press
		<Enter>.
		When this option is selected, move the cursor to the " Hot
Hot Key	Ctrl-F1 to Ctrl-F12	Key Power On " field to select a function key you would
		like to use to power-on the system. The options are from
		Ctrl-F1 to Ctrl-F12.
Any Key	Press Enter	Press any key to power-on the system,
Mouse Left	Press Enter	When this option is selected, double-click the left button of
		the mouse to power-on the system.
Mouse Right	Press Enter	When this option is selected, double-click the right button
		of the mouse to power-on the system.
Button Only	Press Enter	System can be power on with Power Button.
		When this option is selected, press the "wake up" key of
Keyboard 98	Press Enter	the Windows 98 compatible keyboard to power-on the
		system.

Table4 Power On function selections4.5.5.9Onboard FDC Controller

Select “Enabled” to activate the on-board FDC and “Disabled” to activate an add-on FDC.

The choice: Disable, Enable.

4.5.5.10Onboard Serial Port 1 & 2

Select an address and corresponding interrupt for the first/second serial port. The default value for the first serial port is “3F8/IRQ4” and the second serial port is “2F8/IRQ3”.

The choice: Disable, 3F8/IRQ4, 2F8/IRQ3, 3E8/IRQ4, 3F8/IRQ3, and Auto.

4.5.5.11UART Mode Select

Select to activate the Infrared transfer function.

The choice: IrDA, ASKIR, Normal.

4.5.5.12RxD , TxD Active

This choice: Hi, Lo; Lo, Hi; Lo, Lo; Hi, Hi.

56ECB-862/862L User’s Manual