Intel ECB-862 User’s Manual, 4.5.7.1PNP OS installed, 4.5.7PnP/ PCI Setup Defaults, 4.5.7.2Reset Configuration Data

User’s Manual

4.5.7PnP/ PCI Setup Defaults

This section describes configuring the PCI bus system. PCI (Peripheral Component Interconnect) is a system that allows I/O devices to operate at speeds nearing CPU’s when they communicate with own special components.

All of options described in this section are important and technical and it is strongly recommended that only experienced users could make any changes to the default settings.

4.5.7.1PNP OS installed

This field allows you to use a Plug-and-Play (PnP) operating system.

Please set it as "No " if the operating system has no PnP function or to avoid reassigning the IRQs by the operating system.

The choice: Yes, No.

4.5.7.2Reset Configuration Data

In case a conflict occurs after you assign the IRQs or after you configure your system, you can enable this function to allow your system to automatically reset your configuration and reassign the IRQs, DMAs, and I/O address.

The choice: Disable, Enable.

62ECB-862/862L User’s Manual