Intel ECB-862 ECB-862/862L, 4.5.7.4IRQ Resources, 4.5.7.5DMA Resources, 4.5.7.6PCI/VGA Palette Snoop, 4.5.7.3Resources Controlled By

ECB-862/862L

4.5.7.3Resources Controlled By

Default setting is “Auto (ESCD)”. This setting allows the BIOS to self detect setting and Plug-and-Play devices during start up. The user can select and configure IRQs under "Manual" mode.

The choice: Auto (ESCD), Manual.

4.5.7.4IRQ Resources

These options specify the bus that the named interrupt request lines (IRQs) are used on. These options allow you to specify IRQs for use by legacy ISA adapter cards. These options determine if AMIBIOS should remove an IRQ from the pool of available IRQs passed to BIOS configurable devices. The available IRQ pool is determined by reading the ESCD NVRAM. If more IRQs must be removed from the pool, the end user can use these PCI/PnP Setup options to remove the IRQ by assigning the option to the ISA/EISA setting. Onboard I/O is configurable by AMIBIOS. The IRQs used by onboard I/O are configured as PCI/PnP. The settings are PCI/PnP or ISA/EISA. The default settings are PCI/PnP.

4.5.7.5DMA Resources

Select the devices according to your DMA requirements

4.5.7.6PCI/VGA Palette Snoop

Enable this option to correct screen color shifts, when there is a combination of VGA cards, accelerator cards, or MPEG cards present.

The choice: Disable, Enable.

ECB-862/862L User’s Manual 63