ECB-862/862L

Note:

The computer cannot receive or transmit data until the computer and application are fully running. After the item is set as enabled, the system must enter to OS once before system is turned off.

4.5.6.15Wake up on LAN

This allows you to remotely power up your systems through your network by sending a wake-up frame or signal. With this feature, you can remotely upload/download data to/from systems during off-peak hours. Set to Enabled to set this feature. Please refer to session

2.4.6for more information. The choice: Disable, Enable.

4.5.6.16USB KB Wake-up From S3

If your USB KB supports PME (Power Management Event) signal and this item is set as Enabled, USB KB peripherals drive PME signal to wake the system from low-power states S3.

The choice: Disable, Enable.

4.5.6.17Resume by Alarm

Set this option to enable or disable the RTC Alarm to Wake Up the system, which is set at soft off.

The choice: Disable, Enable.

4.5.6.18Date (of Month) Alarm, Time (hh:mm:ss) Alarm

Alarm time on Date / Hour / Minute / Second.Set these options to specify the RTC

4.5.6.19Primary/Secondary IDE 0/1, FDD, COM, LPT Port & PCI PIRQ [A-D] #

These items enable or disable the detection of IDE, floppy, serial, parallel port and PCI PIRQ [A-D] activities for power down state transition. Actually it detects the read/write to/from I/O port.

The choice: Disable, Enable.

ECB-862/862L User’s Manual 61